 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
The built-in layer constraint definition oacMinEdgeLength specifies the minimum edge length for a shape in database units.
| Constraint type: | oaLayerConstraint |
| Value types: | oaIntValue |
| Database types: | oaDesign, oaTech |
| Object types: | oaAppObject |
The following value types are supported by this constraint:
This oaIntValue represents the minimum edge length in database units.
Units: DBU
The following parameters are supported by this constraint:
| Name | Value Type | Units | Default | Description |
|---|---|---|---|---|
| lengthSum oacLengthSumConstraintParamType |
oaIntValue | DBU | None |
When this parameter is specified, the oacMinEdgeLength constraint does not apply if the sum of the consecutive edges that are shorter than the minimum edge length value is less than the value of the lengthSum parameter. |
Edge length constraints increase the probability that OPC techniques can be used on the geometry to address the lithography distortions that are created during manufacturing.
Copyright 2002 - 2010 Cadence Design Systems, Inc.
All rights reserved.